sunnuntai 19. lokakuuta 2014

Dirndl koruja

Dirndl jewelry



Meillä oli kavereiden kanssa Oktoberfest-juhlat ja halusin Dirndl-mekkoni kanssa sopivat korut. Tein Lebkchen-sydämen ja sen kanssa sopivat korvakorut samanvärisestä Fimo-massasta. Sekoitin värin itse, jotta se sopisi Dirndlin värimaailman kanssa. "I mog di" on baijeria ja se tarkoittaa minä pidän sinusta. Se on aika yleinen teksti syötävissä sydämissä, joita myydään Münchenissä. Ruusun tein suunnilleen samalla tavalla kuten teen paperiruusuja. Rullasin ohuen pitkän palan massaa ja leikkasin alaosan tasaiseksi. Aiemmin tein Brezelin ja viiksitkorut, jotka sopivat Oktoberfest-teemaan (linkki).

We had a Oktoberfest party with friends and I wanted to have suitable jewelry with my Dirndl dress. I made a Lebkuchen heart out of Fimo clay and two earrings from the same color I mixed to match the color of my Dirndl. "I mog di" is Bavarian and means "I like you". It's a very common text on the eatable hearts they sell in Munich. The rose I made as I have made paper roses before. I just rolled a long slice of clay and cut the lower part more smooth. Previously I have done Brezel and moustache jewelry to go with my dress (link).

perjantai 17. lokakuuta 2014

Joulukortti ohjeineen

Christmas card with tutorial


Joulukorttiin on kiva laittaa oma kuva, jolloin niistä saa persoonallisemmat, eikä samanlaista ole takuulla kenelläkään muulla. Kasvot voivat olla liimattuina esimerkiksi lumiukon päähän kuten tässä joulukorttimallissa. Tähän korttimalliin menee aikaa noin 30 - 60 min.

It's nice to put your own picture on the Christmas card to make it more personal. Your face can be for example as a snowman's face like in this card model. You need 30 - 60 min for this card. (You can find the English tutorial below the Finnish one.)


Tarvitset:

Punaista kartonkia kokoa A5
Jouluista skräppipaperia tai muunlaista koristepaperia
Vihreää ja punaista kartonkia mistelin lehtiä ja marjoja varten
Valkoista ja punaista glitterliimaa (esimerkiksi Stickles-liimojen värit Diamond ja Candy Cane)
Punaista huopaa tonttulakkia varten
Valkoista narua (noin 15 cm)
(Kuvio)teippiä
Sakset ja liimaa
Kuva omista tai esimerkiksi lapsen tai lemmikin kasvoista (jos haluaa)
Mahdollisesti myös Big Shot -leikkuri ja stanssit Circles #4 sekä Festive Greenery




1. Taita punainen A5-kartonki puoliksi ja leikkaa saksilla (tai paperiveitsellä) sopivan kokoinen aukko.
2. Leikkaa kuviosaksilla jouluisen taustapaperin reunat näteiksi ja liimaa se kortin sisäpuolelle. Tässä käytin valkoista paperia, johon on printattu jouluntoivotuksia suomeksi ja englanniksi.
3. Leikkaa toisesta jouluisesta paperista kolme erikokoista ympyrää. Leikkamisen apuna voidaan käyttää Big Shot -leikkuria ja Circles #4 -stanssia.
4. Teippaa ne peräkkäin naruun esimerkiksi kuvioteipillä. Jos et halua, että toisella puolella näkyy teippi, voit liimata sinne toiset ympyrät samasta tai eri paperista.
5. Liimaa ylimpään ympyrään valokuva. Käytin tässä kortissa Anne Taintor -kuvasta lainattua kuvaa.
6. Teippaa narut kortin sisäpuolle aukon ylä- ja alapuolelle. Tässä voi käyttää jouluista kuvioteippiä. Teipin voi peittää myös samalla punaisella kartongilla, jos haluat. Leikkaa ylitulevat narunpätkät.
7. Leikkaa huopakankaasta pieni tonttulakki ja liimaa se lumiukon päähän.
8. Leikkaa neljä mistelin lehteä ja kuusi marjaa. Tähän voi käyttää taas Big Shot -leikkuria ja Festive Greenery -stanssia.
9. Liimaa mistelin lehdet ja marjat kortin ylä- ja alakulmiin.
10. Lopuksi mistelinmarjat voi koristella punaisella glitterliimalla ja tonttulakkiin voi laittaa valkoisella glitterillä säkenöivä reunus ja lakin päähän pieni pallero.

Ihastele valmista työtäsi! Värit ja kuviot voi halutessaan vaihdella eri kortteihin, jotta saa tekemiseenkin vaihtelua.

Tein näitä lumiukkokortteja viime jouluksi ja joitain erilaisia löytyy aiemmasta postauksestani (linkki).
Hauskoja paperiaskarteluhetkiä! Kysykää ja kommentoikaa ihmeessä, jos siltä tuntuu. Vastaan mielelläni. :)



You need:
Red cardboard size A5
Christmas scrapbook paper or other decorative paper
Green and red cardboard for the mistletoe and its berries
White and red glitter glue (for example Stickles glues Diamond and Candy cane)
Red felt for the elf hat
White yarn (ca. 15 cm)
(Masking) tape 
Scissors and glue
A picture of your face or from your child/pet/toy (not necessary)
Possibly also Big Shot and the dies Circles #4 and Festive Greenery 


1. Fold the red A5 cardboard in half and cut with scissors (or a paper knife) a suitable hole in the front of the card.
2. Cut the edges of a Christmas paper with pattern scissors and glue it inside the card. I used white paper, on which I printed Christmas wishes in Finnish and English. 
3. Cut out of different kind of decorative paper three different sized circles (with Big Shot and Circles #4).
4. Tape them in a row on the yarn with for example masking tape. If you don't want the tape to show, you can also glue paper behind the circles (which I have done).
5. Glue the picture on the circle on top. I used a printed picture from Anne Taintor (I love the retro pictures!).
6. Tape the yarn behind the "window" of the card. You can use Christmas masking tape for this. You can also cover the tape with the same red cardboard if wanted. Cut of the extra yarn.
7.  Cut the elf hat out of red felt and glue it on the snowman's head.
8. Cut four mistletoe leaves and six berries (with Big Shot and Festive Greenery).
9. Glue the leaves and berries in the corners of the card.
10. Decorate the berries with red glitter glue and put some white glitter glue on the hat.

Admire your new handmade Christmas card! You can change the colors and papers to get some more variation between cards (if you are planning to make many).

I made these snowman cards for last Christmas. You can see some different ones in my previous blog post (link).

Have fun papercrafting! Please feel free to ask and comment. I answer gladly. :)

lauantai 27. syyskuuta 2014

Kohotarrapalojen käyttö korttiaskartelussa

Using double-sided thick sticker pieces in card crafting 

Kortteihin saa helposti vähän ulottuvuutta kaksipuoleisilla kohotarrapaloilla, joilla voi nostaa tekstiä tai pieniä kuvia paremmin esille.

You can get easily more dimension on cards with double-sided sticker pieces. They can be used to lift up text or pictures from the background.



Kohotarrapaloja on eripaksuisia. Itselläni on 3, 2 ja 1,5 mm paksuisia paloja. Tässä kortissa on käytetty sekä 3 että 2 mm paloja. Synttäri-sana on kohotettu muita sanoja enemmän. Seuraavassa kuvassa kortti näkyy sivusta, joilloin tarrapalat erottuvat. Paloja laitan palluran reunoille ja yhden keskelle.

There are different sized sticker pieces: some are thicker then others. I have pieces that are 3, 2 and 1,5 mm thick. In this birthday card I have used the first two sizes. The word 'synttäri' (synttäripäivä = birthday) is lifted more then the other words. In the next picture you can see the card from the side.


Kortissa on lisäksi kahta erilaista teippiä ja kolmella erivärisellä glitterliimalla tehtyjä pisaroita. Teksti on leimattu.

In addition I have used two different washi tapes and glitter glue to make colorful dots here and there on the card. The text is made with stamps.


Seuraavassa kortissa on liehuvat liput, joita olen kohottanut hieman vasemmasta reunasta. Ihan reunassa on 2 mm paksuinen tarrapala ja sen jälkeen noin 3 matalampaa palaa. Sen jälkeinen osio on liimattu korttiin. Myös keskimmäinen kuppikakku on kohotettu. Kuppikakut on leikattu skräppipaperista ja niitä olen käyttänyt myös aiemmin (linkki).

In the second card I cut out waving flags that say 'Happy birthday'. They are slightly lifted up from the background on the left corner, where I used a thicker sticker piece on the very end and 2 - 3 smaller ones before I glued the flag flat on the card. Also the middle cupcake is lifted up. The cupcakes are cut out of scrapbook paper and I have also used it before (link).



Tässäkin kortissa on glitteriä ja leimattuja kirjaimia. 
There's also glitter and stamped letters on this card.


Kortissa käytin ensimmästä kertaa myös palluroiden ylijäämäpaloja (kuva alla), jotka muodostuivat Big Shotilla leikattaessa. Siistin niiden reunaa vähän pyöreämmäksi ja liimasin niitä kuppikakkujen taakse. Sopivat vallan mainiosti! Onneksi säästin palat (koska eihän sitä koskaan tiedä, mihin sellaisiakin joskus tarvitsee!). :)

Here I used the leftovers from the cutting of the round shapes (with Big Shot). I trimmed  the edges a bit and glued some behind the cupcakes. And they fit there perfectly! Luckily I saved quite many of these leftovers (because you never know, when you might need them!). :)


Viimeistelin molempien korttien ulkoreunoja Distress Ink -musteella. Tällä tavalla saadaan lisää väriä reunoihin (mikä ei tosin aina ole tarpeen) Se antaa myös vanhaa vaikutelmaa. Käytän värin tuputtamiseen meikkisienen palaa, mutta siihen löytyy ihan "oikeat" työkalutkin. :)

I gave the final touches for the cards with Distress Ink that I put on the sides with a make-up sponge. It gives more color and makes the card also look a bit old. There are also more "professional" tools for this, but the sponge works nicely as well.


Lopuksi leimasin kortin taakse handmade by -leiman, johon lisäsin nimeni. Ostin Saksasta hienon leimasinsetin, jossa oli erilaisia handmade-leimoja ja siitä lähtien olen lisännyt jonkun niistä kortteihini.

In the end I stamped 'handmade by' behind the card and added my name. I bought a really nice stamp set from Germany, which has many stamps like this.



Nämä kortit löytyvät myöhemmin syksyllä Tampereen kädentaitomessuilta, jossa niitä myydään lastensairaalan hyväksi. Käy piipahtamassa! Tai tee itsekin kortteja mukaan korttikeräykseen (josta kerroin edellisessä postauksessa, linkki).

These cards I made for the card collection for the new children's hospital. I wrote about that the last time (link). You can also join and make cards!

sunnuntai 21. syyskuuta 2014

Kortteja lastensairaalan hyväksi

Cards for the children's hospital

Nyt on vielä käynnissä korttikeräys lastensairaalan hyväksi. Aloitin nyt niiden korttien tekemisen ja tässä ensimmäinen. Tämä on ensimmäinen korttini, joka menee myyntiin, jolloin on vielä perfektionistinen kuin yleensä. :) Tarkoitus on tehdä vielä lisää. Tule sinäkin mukaan keräykseen! Myyntirahat menee hyvään tarkoitukseen!

The card collecting for building of the new children's hospital. I started making some cards now and here's the first one. This is my first card, that goes on sale, so I was even more perfectionistic then usual. :) I'm planning to still make more cards. Come and join the collection! The money goes to a good cause!






Hullu hiivojen kasvattaja

Crazy yeast cultivator

Joskus satunnaisesti saan luovia pyllärryksiä myös töissä. Se on vähän sellaista hullua hiivan kasvatusta. Kuvissani on vahvasti mukana huumori ja ajattelin jakaa hiivojen ilosanomaa. Perustin siksi Facebookiin hullun hiivankasvattajan sivut (linkki). Postailen sinne juttuja, joissa olen yhdistänyt luovuutta ja biotekniikkaa. Käy kurkkaamassa! :)

Sometimes I have a crazy creative moment at work. There's a lot of humor in my pictures and I thought I could spread the joy. Therefore I created a page for the crazy yeast cultivator (link). I'll post things there, where I combine creativity with biotechnology. Check it out and enjoy! :)


tiistai 16. syyskuuta 2014

Hiivat koruna

Yeast as jewelry

 
Tein taas vähän erilaisen korun töihini liittyen. Kasvatan tällä hetkellä töissä hiivaa ja siksi hiivat ovat joskus kotonakin mielessä. :) Olin joskus kauan sitten ostanut Tigeristä erivärisiä helmiä, jotka tulivat pienissä söpöissä lasipurkeissa. Helmiä oli tarkoitus käyttää korttiaskartelussa, mutta ne unohtuivat jonnekin kaiken muun askartelutavaran alle. Satuin kuitenkin löytämään ne sopivalla hetkellä, kun keksin tehdä hiivanäytekorun! :)

I made special jewelry again that relates to my work. I cultivate yeast at the moment and therefore I think of yeast at home as well. :) I bought small pearls for card making from Tiger. They came in small glass jars that I managed to loose in all my handicrafting stuff. But I found them again when I got the idea to make a the yeast sample! :)

Sekoitin valkoista ja vähän keltaista Fimo-massaa yhteen, jotta sain enemmän hiivan biomassan väristä muovailuvahaa. Toki hiivan biomassan värisävy voi hieman muuttua, riippuen minkälaisessa alustassa se kasvatetaan. Mutta useinmiten se on vaalean ruskeaa.

I mixed white Fimo modelling clay with a little bit of yellow to get a more yeasty color. Of course the the color tone of the yeast biomass varies depending on the medium where it is cultivated. Usually it is light brown though.

Palluroita piti tehdä ylimäärin, koska pieniin palloihin oli vaikea piirtää, eikä kaikki naamat onnistuneet. Palluroiden halkaisija oli noin 2-4 mm ja käytin piirtämiseen hyvin ohutta permanent-tussia.

I had to make some extra balls cause it was difficult to draw on such small balls. The diameter of the balls was circa 2-4 mm. I used a very thin permanent pen.



Pulloon päätyi vähän erilaisia hiivoja: jollain on silmälasit ja toisella taas viikset. Suurin osa on kuitenkin ihan vain hymyileviä naamoja. Seuraavassa kuvassa vähän näkee, minkälaisia hiivoja pulloon päätyi. Punainen hiiva on kontaminaatio (joita ei normaalissa tilanteissa suvaita ollenkaan). :)
I ended up drawing a few little different yeast: one had glasses and one had a mustache. Most yeast balls are just smiling. In the next picture you can see a little how the yeast look like. The red one is a contamination (which in normal cultivations is all but welcome). :)


Tein lisäksi vähän isommista palluroista hiivaiset korvakorut.

In addition I made two slightly bigger balls for yeast earrings.  


Tämä on jo toinen biotekninen koru. Mitäköhän tieteellistä seuraavaksi tekisin? :)

This is already my second biotechnology jewelry. I wonder what scientific things I would make next? :)

tiistai 9. syyskuuta 2014

Roottorikaulakoru

Rotor jewelry

Työskentelen yliopistolla, missä kasvatan tällä hetkellä hiivaa bioreaktorissa. Bioreaktorit ovat hienoja laitteita, joissa saa hyvät kasvatusolosuhteet pöpöille, jotta ne tuottavat kaikkea kivaa. Koska työskentelen tosi läheisesti näiden laitteiden kanssa, halusin niihin liittyvän korun. Sisällä oleva roottori tuntui olevan ainoa koruksi sopiva osa, joten tein sellaisen Fimo-massasta.

I'm working at a university, where I'm cultivating yeast in a bioreactor at the moment. Bioreactors are really nice, since the cultivation conditions can be made optimal for the microbes to grow and make nice products. Because I work closely with this equipment, I wanted jewelry related to that. The rotors inside the bioreactor seemed to be the most suitable for this. So I made one of Fimo modelling clay.


Tarkoitus on tehdä vielä sopivat korvakorut, mutta sitä ennen haluan tehdä jotain muuta. :)

I'm planning to make matching earrings as well, but I want to finish some other handicrafting projects first. :)



Jos bioreaktorit ja pöpöt kiinnostavat, tsekkaa humoristinen esitykseni (englanniksi) bioreaktorin käytöstä erilaisten mikrobien kasvatuksesta (linkki). Esittäjänä toimii Herbert, baijerilainen tutkija Lederhoseneissa apunaan virkatut pöpöt. Herbertin virkatut pöpöt esittelin aiemmin blogissani (linkki).

If bioreactors and microbes seem interesting, check out my humoristic presentation (in English) in using the bioreactor to cultivate different microbes (link). Herbert, a Bavarian researcher in Lederhosen, is presenting it with his crocheted microbes. Herbert's microbes I presented earlier in my blog (link).

Ja jos kreisit laboratoriokuvat naurattaa, kannattaa tsekkaa Instagram-tilini (linkki), josta löytyy luovia erikoisia hetkiä työn keskellä. :)

And if crazy laboratory selfies make you laugh, go to my Instagram account (link), where I post pictures from short creative breaks from work. :)